EN IEC 60966-4:2024
(Main)Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
IEC 60966-4:2024 is a sectional specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-rigid cable assemblies, quality assessment, delivery and storage, etc. This part of IEC 60966 applies to semi-rigid cable assemblies composed of semi-rigid coaxial cables and coaxial connectors. Semi-rigid cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4: Rahmenspezifikation für halbstarre konfektionierte Koaxialkabel
Cordons coaxiaux et cordons pour fréquences radioélectriques – Partie 4 : Spécification intermédiaire pour cordons coaxiaux semi-rigides
L’IEC 60966-4:2024 est une spécification intermédiaire qui concerne les cordons coaxiaux semi-rigides qui fonctionnent en mode électromagnétique transverse (TEM). Elle spécifie la conception et la construction, la désignation de type IEC, la qualité d’exécution, le marquage et l’emballage, les valeurs assignées et les caractéristiques normales, les exigences électriques, mécaniques et environnementales des cordons semi-rigides finis, l’évaluation de la qualité, la livraison et le stockage, etc. La présente partie de l’IEC 60966 s’applique aux cordons semi-rigides composés de câbles coaxiaux semi-rigides et de connecteurs coaxiaux. Les cordons semi-rigides sont largement utilisés dans les systèmes de communication mobile, le matériel d’essai hyperfréquences, les radars, l’aérospatial et d’autres domaines. NOTE 1 Pour les besoins de la présente spécification intermédiaire, un cordon est toujours considéré dans son intégralité. Toutes les spécifications s’appliquent au cordon fini et non à des parties individuelles et non assemblées de celui-ci. NOTE 2 La présente spécification intermédiaire peut être complétée par des spécifications particulières donnant des détails supplémentaires comme l’exige l’application particulière. Cette application n’exigera pas obligatoirement tous les essais.
Sestavi radiofrekvenčnih in koaksialnih kablov - 4. del: Področna specifikacija za sestave poltogih koaksialnih kablov (IEC 60966-4:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60966-4:2024
01-junij-2024
Sestavi radiofrekvenčnih in koaksialnih kablov - 4. del: Področna specifikacija za
sestave poltogih koaksialnih kablov (IEC 60966-4:2024)
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-
rigid coaxial cable assemblies (IEC 60966-4:2024)
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4: Rahmenspezifikation für
halbstarre konfektionierte Koaxialkabel (IEC 60966-4:2024)
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 4: Spécification
intermédiaire pour cordons coaxiaux semi-rigides (IEC 60966-4:2024)
Ta slovenski standard je istoveten z: EN IEC 60966-4:2024
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN IEC 60966-4:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60966-4:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 60966-4:2024
EUROPEAN STANDARD EN IEC 60966-4
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2024
ICS 33.120.10 Supersedes EN 60966-4:2003
English Version
Radio frequency and coaxial cable assemblies - Part 4:
Sectional specification for semi-rigid coaxial cable assemblies
(IEC 60966-4:2024)
Cordons coaxiaux et cordons pour fréquences Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4:
radioélectriques - Partie 4 : Spécification intermédiaire pour Rahmenspezifikation für halbstarre konfektionierte
cordons coaxiaux semi-rigides Koaxialkabel
(IEC 60966-4:2024) (IEC 60966-4:2024)
This European Standard was approved by CENELEC on 2024-04-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60966-4:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60966-4:2024
EN IEC 60966-4:2024 (E)
European foreword
The text of document 46/964/FDIS, future edition 3 of IEC 60966-4, prepared by IEC/TC 46 "Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60966-4:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-01-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-04-16
document have to be withdrawn
This document supersedes EN 60966-4:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60966-4:2024 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60966-4:2024
EN IEC 60966-4:2024 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undate
...
SLOVENSKI STANDARD
oSIST prEN IEC 60966-4:2022
01-september-2022
Sestavi radiofrekvenčnih in koaksialnih kablov - 4. del: Področna specifikacija za
sestave poltogih koaksialnih kablov
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-
rigid coaxial cable assemblies
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4: Rahmenspezifikation für
halbstarre konfektionierte Koaxialkabel
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 4: Spécification
intermédiaire pour cordons coaxiaux semi-rigides
Ta slovenski standard je istoveten z: prEN IEC 60966-4:2022
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
oSIST prEN IEC 60966-4:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60966-4:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60966-4:2022
46/886/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60966-4 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-03 2022-08-26
SUPERSEDES DOCUMENTS:
46/867/CD, 46/880/CC
IEC TC 46 : CABLES, WIRES, WAVEGUIDES, RF CONNECTORS, RF AND MICROWAVE PASSIVE COMPONENTS AND
ACCESSORIES
SECRETARIAT: SECRETARY:
United States of America Mr David Wilson
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 46A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid
coaxial cable assemblies
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60966-4:2022
IEC CDV 60966-4 © IEC 2022 2 46/886/CDV
1
2 CONTENTS
3
4 1 Scope . 4
5 2 Normative references . 4
6 3 Definitions . 4
7 4 Design and construction . 5
8 4.1 Cable design and construction. 5
9 4.2 Connector design and construction . 5
10 4.3 The relative position dimensions of the interface . 5
11 4.4 Outline of the cable assembly . 5
12 5 Workmanship, marking and packaging . 6
13 6 IEC type designation . 7
14 7 Rating and characteristics . 8
15 7.1 Nominal characteristic impedance . 8
16 7.2 Temperature range . 8
17 8 Requirements of finished cable assemblies . 8
18 8.1 General . 8
19 8.2 Electrical requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.