ASTM E3074/E3074M-20
(Practice)Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities
Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities
SIGNIFICANCE AND USE
4.1 A clearance examination of abatement areas and other areas associated with other lead-hazard control activities, or building maintenance or modification activities in single-family detached dwellings, individual units in multifamily dwellings, common areas or exterior sites, and child-occupied facilities is performed to determine that the clearance area is adequately safe for reoccupancy.
4.2 It is the responsibility of the user of this standard to assure that all regulatory, contractual and personnel requirements are met prior to conduct of a clearance examination. At a minimum, users of this standard shall be trained in its use and in safe practices for its conduct.
Note 2: Authorities having jurisdiction may have certification or specific training requirements, or both.
4.3 This practice is one of a set of standards developed for lead hazard management activities. The visual assessment procedures required in this practice are found in Practice E2255/E2255M and the record keeping requirements are found in Practice E2239.
4.4 Although this practice was primarily developed for dwellings and for other child-occupied facilities, this practice may be also applied to nonresidential buildings and related structures by agreement between the client and the individual conducting the clearance examination.
4.5 This practice may be used by owners and property managers, including owner-occupants, and others responsible for maintaining facilities. It may also be used by lead hazard management consultants, construction contractors, labor groups, real estate and financial professionals, insurance organizations, legislators, regulators, and legal professionals.
4.6 This practice does not address whether lead-hazard reduction activities or other building modification or maintenance work were performed properly.
SCOPE
1.1 This practice covers visual assessment for the presence of deteriorated paint, surface dust, painted debris, and paint chips with environmental sampling of surface dust to determine whether a lead hazard exists at the time of sample collection, following lead-hazard reduction activities, or other building maintenance and modification activities.
1.2 This practice addresses clearance examination of single-family detached dwellings (including exterior structures, such as fences), individual units in multifamily dwellings, common areas or exterior sites, and child-occupied facilities.
1.3 This practice also addresses clearance examinations that may include soil sampling, for example when soil abatement has been performed.
1.4 This practice includes a procedure for determining whether regulatory requirements for lead clearance levels for dust and, where warranted, soil have been met, and consequently, whether a clearance area passes or fails a clearance examination.
Note 1: This practice is based on that portion of “clearance” described for the United States in 40 CFR Part 745 for abatement, and in 24 CFR Part 35 for lead-hazard reduction activities other than abatement.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Tr...
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: E3074/E3074M − 20
Standard Practice for
Clearance Examinations Following Lead Hazard Reduction
Activities in Single Family Dwellings, in Individual Units of
Multifamily Dwellings, and in Other Child-Occupied
1
Facilities
ThisstandardisissuedunderthefixeddesignationE3074/E3074M;thenumberimmediatelyfollowingthedesignationindicatestheyear
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 1.6 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
1.1 This practice covers visual assessment for the presence
responsibility of the user of this standard to establish appro-
of deteriorated paint, surface dust, painted debris, and paint
priate safety, health, and environmental practices and deter-
chips with environmental sampling of surface dust to deter-
mine the applicability of regulatory limitations prior to use.
mine whether a lead hazard exists at the time of sample
1.7 This international standard was developed in accor-
collection, following lead-hazard reduction activities, or other
dance with internationally recognized principles on standard-
building maintenance and modification activities.
ization established in the Decision on Principles for the
1.2 This practice addresses clearance examination of single-
Development of International Standards, Guides and Recom-
family detached dwellings (including exterior structures, such
mendations issued by the World Trade Organization Technical
as fences), individual units in multifamily dwellings, common
Barriers to Trade (TBT) Committee.
areas or exterior sites, and child-occupied facilities.
2. Referenced Documents
1.3 This practice also addresses clearance examinations that
2
may include soil sampling, for example when soil abatement 2.1 ASTM Standards:
has been performed. D1356 Terminology Relating to Sampling and Analysis of
Atmospheres
1.4 This practice includes a procedure for determining
D4840 Guide for Sample Chain-of-Custody Procedures
whether regulatory requirements for lead clearance levels for
D5124 Practice for Testing and Use of a Random Number
dust and, where warranted, soil have been met, and
Generator in Lumber and Wood Products Simulation
consequently, whether a clearance area passes or fails a
E631 Terminology of Building Constructions
clearance examination.
E1480 Terminology of Facility Management (Building-
NOTE 1—This practice is based on that portion of “clearance” described
Related)
for the United States in 40 CFR Part 745 for abatement, and in 24 CFR
E1605 Terminology Relating to Lead in Buildings
Part 35 for lead-hazard reduction activities other than abatement.
E1727 Practice for Field Collection of Soil Samples for
1.5 The values stated in either SI units or inch-pound units
Subsequent Lead Determination
are to be regarded separately as standard. The values stated in
E1728/E1728M Practice for Collection of Settled Dust
each system are not necessarily exact equivalents; therefore, to
Samples Using Wipe Sampling Methods for Subsequent
ensure conformance with the standard, each system shall be
Lead Determination
used independently of the other, and values from the two
E1792 Specification for Wipe Sampling Materials for Lead
systems shall not be combined.
in Surface Dust
E2239 PracticeforRecordKeepingandRecordPreservation
for Lead Hazard Activities
1
This practice is under the jurisdiction ofASTM Committee D22 on Air Quality
and is the direct responsibility of Subcommittee D22.12 on Sampling and Analysis
2
of Lead for Exposure and Risk Assessment. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Sept. 1, 2020. Published September 2020. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 2016. Last previous edition approved in 2016 as E3074/E3074M – 16. Standards volume information, refer to the standard’s Document Summary page on
DOI: 10.1520/E3074_E3074M-20. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E3074/E3074M − 20
E2255/E2255M Practice for ConductingVisualAssessments 4. Significance and Use
for Lead Hazards in Buildings
4.1 A clearance examination of abatement areas and other
3
2.2 U.S. Code of Federal Regulations
areas associated with other lead-hazard control activities, or
24 CFR Part 35 Department of Housing and Urban Deve
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E3074/E3074M − 16 E3074/E3074M − 20
Standard Practice for
Clearance Examinations Following Lead Hazard Reduction
Activities in Single Family Dwellings, in Individual Units of
Multifamily Dwellings, and in Other Child-Occupied
1
Facilities
This standard is issued under the fixed designation E3074/E3074M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice covers visual assessment for the presence of deteriorated paint, surface dust, painted debris, and paint chips with
environmental sampling of surface dust to determine whether a lead hazard exists at the time of sample collection, following
lead-hazard reduction activities, or other building maintenance and modification activities.
1.2 This practice addresses clearance examination of single-family detached dwellings (including exterior structures, such as
fences), individual units in multifamily dwellings, common areas or exterior sites, and child-occupied facilities.
1.3 This practice also addresses clearance examinations that may include soil sampling, for example when soil abatement has been
performed.
1.4 This practice includes a procedure for determining whether regulatory requirements for lead clearance levels for dust and,
where warranted, soil have been met, and, consequentlyand consequently, whether a clearance area,area passes or fails a clearance
examination.
NOTE 1—This practice is based on that portion of “clearance” described for the United States of America in 40 CFR Part 745 for abatement, and in 24
CFR Part 35 for lead-hazard reduction activities other than abatement.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each
system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used
independently of the other, and values from the two systems shall not be combined.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety safety, health, and healthenvironmental practices and determine the
applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
1
This practice is under the jurisdiction of ASTM Committee D22 on Air Quality and is the direct responsibility of Subcommittee D22.12 on Sampling and
Analysis,Analysis of Lead,Lead for Exposure and Risk Assessment.
Current edition approved Oct. 1, 2016Sept. 1, 2020. Published November 2016September 2020. Originally approved in 2016. Last previous edition approved in 2016 as
E3074/E3074M – 16. DOI: 10.1520/E3074_E3074M-16.10.1520/E3074_E3074M-20.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E3074/E3074M − 20
2. Referenced Documents
2
2.1 ASTM Standards:
D1356 Terminology Relating to Sampling and Analysis of Atmospheres
D4840 Guide for Sample Chain-of-Custody Procedures
D5124 Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
E631 Terminology of Building Constructions
E1480 Terminology of Facility Management (Building-Related)
E1605 Terminology Relating to Lead in Buildings
E1727 Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728E1728/E1728M Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead
Determination
E1792 Specification for Wipe Sampling Materials for Lead in Surface Dust
E2239 Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2255/E2255M Practice for Conducting Visual Assessments for Lead Hazards in Buildings
3
2.2 U.S. Code of Federal Regulations
24 CFR Part 35 Department of Housing and Urban Development (HUD), Requirements for Notification, Evaluation and
Reduction of Lead-Based Paint Hazards in Federally Owned Reside
...
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E3074/E3074M − 20
Standard Practice for
Clearance Examinations Following Lead Hazard Reduction
Activities in Single Family Dwellings, in Individual Units of
Multifamily Dwellings, and in Other Child-Occupied
1
Facilities
This standard is issued under the fixed designation E3074/E3074M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 1.6 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
1.1 This practice covers visual assessment for the presence
responsibility of the user of this standard to establish appro-
of deteriorated paint, surface dust, painted debris, and paint
priate safety, health, and environmental practices and deter-
chips with environmental sampling of surface dust to deter-
mine the applicability of regulatory limitations prior to use.
mine whether a lead hazard exists at the time of sample
1.7 This international standard was developed in accor-
collection, following lead-hazard reduction activities, or other
dance with internationally recognized principles on standard-
building maintenance and modification activities.
ization established in the Decision on Principles for the
1.2 This practice addresses clearance examination of single-
Development of International Standards, Guides and Recom-
family detached dwellings (including exterior structures, such
mendations issued by the World Trade Organization Technical
as fences), individual units in multifamily dwellings, common
Barriers to Trade (TBT) Committee.
areas or exterior sites, and child-occupied facilities.
2. Referenced Documents
1.3 This practice also addresses clearance examinations that
2
2.1 ASTM Standards:
may include soil sampling, for example when soil abatement
D1356 Terminology Relating to Sampling and Analysis of
has been performed.
Atmospheres
1.4 This practice includes a procedure for determining
D4840 Guide for Sample Chain-of-Custody Procedures
whether regulatory requirements for lead clearance levels for
D5124 Practice for Testing and Use of a Random Number
dust and, where warranted, soil have been met, and
Generator in Lumber and Wood Products Simulation
consequently, whether a clearance area passes or fails a
E631 Terminology of Building Constructions
clearance examination.
E1480 Terminology of Facility Management (Building-
NOTE 1—This practice is based on that portion of “clearance” described
Related)
for the United States in 40 CFR Part 745 for abatement, and in 24 CFR
E1605 Terminology Relating to Lead in Buildings
Part 35 for lead-hazard reduction activities other than abatement.
E1727 Practice for Field Collection of Soil Samples for
1.5 The values stated in either SI units or inch-pound units
Subsequent Lead Determination
are to be regarded separately as standard. The values stated in
E1728/E1728M Practice for Collection of Settled Dust
each system are not necessarily exact equivalents; therefore, to
Samples Using Wipe Sampling Methods for Subsequent
ensure conformance with the standard, each system shall be
Lead Determination
used independently of the other, and values from the two
E1792 Specification for Wipe Sampling Materials for Lead
systems shall not be combined.
in Surface Dust
E2239 Practice for Record Keeping and Record Preservation
for Lead Hazard Activities
1
This practice is under the jurisdiction of ASTM Committee D22 on Air Quality
and is the direct responsibility of Subcommittee D22.12 on Sampling and Analysis
2
of Lead for Exposure and Risk Assessment. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Sept. 1, 2020. Published September 2020. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 2016. Last previous edition approved in 2016 as E3074/E3074M – 16. Standards volume information, refer to the standard’s Document Summary page on
DOI: 10.1520/E3074_E3074M-20. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E3074/E3074M − 20
E2255/E2255M Practice for Conducting Visual Assessments 4. Significance and Use
for Lead Hazards in Buildings
4.1 A clearance examination of abatement areas and other
3
2.2 U.S. Code of Federal Regulations
areas associated with other lead-hazard control activities, or
24 CFR Part 35 Department of Housing and Urban Devel-
building maintenance or modification activities in single-
opment (HUD), Requirements for Notification, Evaluation
family de
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.